Winlog Pro - SCADA HMI Software

Winlog Pro - SCADA HMI Software

venerdì 24 giugno 2016

Sielco Sistemi is pleased to announce IOlog data acquisition system. IOlog includes a wide range of input/output modules and isolated serial converters/adapters which are available in three different versions:
All I/O modules ensure a high accuracy and a stable measurement over time and with changes in temperature. A dual Watch-Dog (hardware and software) looks after the proper operation of the CPU and sets outputs to safety values in case of communication failure. Signalling leds allow an immediate diagnosis of device operation. The full galvanic isolation ensures a good protection against interference present in industrial environments.
Depending on the version, i/o modules have a RS485 interface with a Modbus RTU/ASCII protocol or an Ethernet interface with a Modbus TCP protocol. By linking several modules (via a RS485 or Ethernet bus) to a PC running Winlog Pro SCADA software, you can easily build a reliable and convenient Data Acquisition System for both industrial and home applications.
www.sielcosistemi.com

mercoledì 18 maggio 2016

Communication protocols for a SCADA / HMI software

https://www.sielcosistemi.com/en/products/winlog_scada_hmi/winlog-communication-driver.html

The completeness of the library of communication protocols for a SCADA / HMI software is the real strength because it provides connectivity to field devices. 

Sielco Sistemi strives daily to maintain the internal library of its SCADA software Winlog Pro up to date with the evolution of the communication protocols of the most common devices for industrial automation and building automation (Siemens, Allen Bradley, Omron, Mitsubishi, Schneider Electric etc.) through a continuous search and optimization work. 

Winlog Pro supports communication with most of electronic instruments available on the market (PLCs, controllers, indicators, I/O modules, etc.) thanks to an extensive library of native communication drivers and to the OPC Client interface. 

OPC (OLE for Process Control) is an industrial standard, created by main worldwide leading automation manufacturers, that allows data exchange between different software components without need of any special adjustment. OPC Client driver supports data access (DA) to OPC servers DA 1.0, 2.0 and 3.0; it can interface both local OPC Servers located on the same PC (through COM objects) and remote OPC Servers (through DCOM objects) located on different PCs linked to the same LAN. 

Both native communication drivers and OPC Client interface are included in the basic Winlog Pro package. In Winlog Pro new version all communication drivers have been revised, in order to uniform the configuration of the various protocols. New communication protocols were also included, such as M-Bus protocol and Mitsubishi MELSEC.

lunedì 2 maggio 2016

Quick Support Remote Control System


Sielco Sistemi provides its clients with a customized technical support service that gives access to the best technical expertise to rapidly resolve any issues. A highly competent and qualified team, able to answer to all your queries, is at your disposal; for more complex problems, the R&D team is directly involved.

The new SCADA Winlog Pro version 3.01 makes available remote control via TeamViewer technology. By a simple “click” on the icon “Quick Support”, the user will allow the Sielco Sistemi support team to provide remote control and technical assistance through Internet.

Sielco Sistemi offers to its customers training courses at different levels to get practice in the use of Winlog Pro software. Courses are tailored to customers needs. The purpose of the course is always pratical: to use properly the software tools and to be able to develop complete run-time applications. Topic sessions are always followed by "hands-on" sessions; participants will become familiar with Winlog Pro software by developing step-by-step applications or finding out, with the aid of the trainer, the right solutions to specific problems.

martedì 26 aprile 2016

Production


Supervision of industrial plants allows certification of production and storage processes in compliance with quality standards

mercoledì 20 aprile 2016

In the field of human to machine interfaces (HMI) and supervisory systems (SCADA), there is an increasing request of more attractive and realistic graphic representations. To this purpose Sielco Sistemi has equipped its supervisory software Winlog Pro 3.01 version with a new class of powerful objects that increase the graphic impact and the realism of the SCADA applications. In addition to the graphic library Symbol Factory, development tools include the popular libraries of animated graphic objects Industrial Gadgets ActiveX Basic Edition and Industrial Gadgets ActiveX PRO Edition, with lots of animated objects digital (buttons, switches, leds), numeric (pointer indicators, potentiometrs, led displays) and complex (motors, pumps, valves, tanks, pipes). We have revised all development tools, in order to increase performance and make it easier to use. A special effort was made to improve graphics, increasing the number of supported formats (JPG, PNG, GIF, …), enhancing transparency options, making it smoother motion graphics. These new graphic objects will make of Winlog Pro SCADA software an ideal solution for the development of operator interfaces with virtual instrumentation. This new release confirms the care of Sielco Sistemi to continuously improve Winlog Pro, the powerful, low cost and easy to use SCADA software selected by many leader manufacturers of electronic instrumentation and collecting increasing consensus among Italian and international users. www.sielcosistemi.com

venerdì 15 aprile 2016

Virtual Instrumentation

Realistic rendering of panel instrumentation provides remote users with an instant check of the variables to monitor.

martedì 12 aprile 2016

Sielco Sistemi - SCADA software Winlog is renewed


Sielco Sistemi, a leader company in SCADA/HMI systems developing, is pleased to announce that the new version 3.01 of SCADA software Winlog Pro is now available. The new version represents a real revolution in terms of look, functionality and performance.
We have re-designed the whole SCADA software platform to take advantage of new technologies, while maintaining the original robustness and reliability and ensuring the almost complete compatibility with previously developed applications.
The product has a more up-to-date and appealing look; all icons are in Pure Flat 2013 style and access to various functions and development tools is now more easy and intuitive.
We have revised all development tools, in order to increase performance and make it easier to use. A special effort was made to improve graphics, increasing the number of supported formats (JPG, PNG, GIF, …), enhancing  transparency options, making it smoother motion graphics.
In addition to the graphic library Symbol Factory, development tools include the popular libraries of animated graphic objects Industrial Gadgets ActiveX Basic Edition and Industrial Gadgets ActiveX PRO Edition, with lots of animated objects digital (buttons, switches, leds), numeric (pointer indicators, potentiometrs, led displays) and complex (motors, pumps, valves, tanks, pipes).
All communication drivers have been revised, in order to uniform the configuration of the various protocols. New communication protocols were also included, such as M-Bus protocol and Mitsubishi MELSEC.
Version 3.01 makes available remote control via TeamViewer technology. By a simple “click” on the icon “Quick Support”, the user will allow the Sielco Sistemi support team to provide remote control and technical assistance through Internet.
Winlog Pro now includes a new web server support which conforms the graphical object properties to those of the standard version and provides a more fast and safe data exchange between client and server. Clients can access the server via new passwords for sending commands and write data. Web server support is now available with the free demo version of Winlog Lite.

Finally it should be noted that version 3.01 of SCADA software Winlog Pro makes it available new and even more convenient development and runtime licenses.

Here you can download the free demo version of Winlog Lite.

venerdì 8 aprile 2016

Sielco Sistemi – The new Sistemi Sielco website is online!


The Sielco Sistemi website has been completely renewed in graphics and contents. The new website features a modern and attractive layout with a mobile responsive design.
Sielco Sistemi was created from the original group that in the early '90 has developed the software package for automation Winlog and now is offering its renewed and enhanced version Winlog Pro. Our mission is to promote the diffusion of the SCADA software Winlog Pro all over the world through the continuous updating and enrichment of the product, the close cooperation with our customers and Solution Providers and the expansion and strengthening of our distribution network. In addition to Winlog Pro SCADA software, we offer a range of industrial Panel PCs (PClog) and a Data Acquisition System (IOlog). Sielco Sistemi also offers itself as a partner for the development of applications and the implementation of integrated hardware/software solutions.
Our know-how comes from direct experience gained in over twenty years of fieldwork. Among our customers are machine manufacturers, production managers, engineering companies and electrical installers. We have provided systems for supervision of industrial plants, for acquisition and processing of production data, for quality control of production and storing process, for building automation, for remote control of public utility networks. We have gained specific skills in several industrial sectors as textiles, plastics, food, ceramics and electronics.